Barco ICMP Service Manual Download

Page: 13 / 96

2. General

2.3

ICMP HDD status LEDs

Image 2-3

Status overview PWR/ERROR and READY LEDs:

HDD I/O

RAID

ICMP HDD Status

Off

HDD idle / Disk in RAID OK.

Blinking

Green

Off

HDD I/O activity / Disk in RAID OK.

Blinking

Green

Blinking Red

HDD I/O activity / RAID rebuilding.

Off

Red

HDD idle / Disk error. See troubleshooting table below for curative
actions.

Troubleshooting

Situation

Solution

One disk failed (red LED) +

RAID degraded

The ongoing event is not interrupted.

Note:

The disk status (RAID degraded) can be

retrieved via the (Web) Commander. See user
guide of the (Web) Commander.

1. Switch off the power.
2. Replace the defect HDD with an original HDD

spare part. See procedure "Removing a HDD
from the ICMP", page 71, and "Installing a
HDD into the ICMP", page 72. Ensure to insert
the HDD

rmly.

3. Switch on the power.

Result:

As soon the new HDD is detected by the

ICMP the rebuild of the RAID is started (Blinking
red LED).

One disk failed (red LED) + Error 10580 “

local

storage not available

”.

Note:

The disk status (Error code) can be

retrieved via the (Web) Commander. See user
guide of the (Web) Commander.

1. Switch off the power.
2. Replace the defect HDD with an original HDD

spare part. See procedure "Removing a HDD
from the ICMP", page 71, and "Installing a
HDD into the ICMP", page 72. Ensure to insert
the HDD

rmly.

3. Switch on the power.

Result:

As soon the new HDD is detected by the

ICMP the rebuild of the RAID is started (Blinking
red LED).

R5906594 ICMP 09/11/2016

Summary of Contents for ICMP

































































































Search results

Summary of Contents for ICMP

Reviews:

Related manuals for ICMP

Brands by name

Popular brands

Barco ICMP, Service Manual

Search results

Summary of Contents for ICMP

Reviews:

Related manuals for ICMP

Brands by name

Popular brands