Barco ICMP Service Manual Download Page 37

Page: 37 / 96

4. Troubleshooting

Code 10575: “storage - HDD size mismatch” (Warning)

Situation

Solution

One of the HDD has a
capacity lower than the
expected size. The HDD
cannot be added to the RAID.

Insert a valid HDD of the same size as the other HDD.

Code 10576: “storage - possible

le system corruption - please run

le system

check” (Maintenance)

Situation

Solution

The system detected
a possible

le system

corruption.

Run a

le system check using Communicator.

Code 10577: “storage -

le system check running - command rejected” (Error)

Situation

Solution

The command is rejected
because a

le system check

is running.

Wait the end of the

le system check and retry. The

le system check

can take several minutes to complete.

Code 10578: “storage - storage database update in progress - command rejected”
(Error)

Situation

Solution

The command is rejected
because the system
database is being updated.

Wait the end of the database update. The database update can take
several minutes. Please do not try to abort the database update or to
reboot the projector.

Code 10579: “storage - storage disabled by con

guration - command not avail-

able” (Error)

Situation

Solution

The command cannot be
executed because the
storage has been disabled by
con

guration.

Check the storage con

guration.

Code 10580: “storage - local storage not available” (Error)

Situation

Solution

The local storage was not
detected after powering the
projector because the HDD
are not inserted.

Insert all the HDDs correctly.

The system reports this error
but it is expected to play
without HDD.

Edit the settings to indicate that the system doesn’t have any local
storage. All ingest, content management and scheduling will be
disabled.

Code 10581: “storage - requested content not found” (Warning)

Situation

Solution

The content is not present on
the system anymore.

Insert all the HDDs correctly.

R5906594 ICMP 09/11/2016

Summary of Contents for ICMP

































































































Search results

Summary of Contents for ICMP

Reviews:

Related manuals for ICMP

Brands by name

Popular brands

Barco ICMP, Service Manual

Search results

Summary of Contents for ICMP

Reviews:

Related manuals for ICMP

Brands by name

Popular brands