Barco ICMP Service Manual Download Page 34

Page: 34 / 96

4. Troubleshooting

Code 10537: “settings - test settings already running - test settings rejected” (Er-
ror)

Situation

Solution

The test of settings has been
rejected because another test
of settings is already running.

Wait for the end of the previous settings test and retry. If it does not
work then restart the projector and retry.

Code 10538: “settings - invalid system settings - settings rejected” (Error)

Situation

Solution

The system settings are
not correct and have been
rejected.

Check that the system settings are consistent.

Code 10539: “settings - unreachable NTP server - NTP sync might not work”
(Warning)

Situation

Solution

The NTP server could not be
reached.

Check the NTP server settings and the network settings. Check the
system network connectivity. Make sure no

rewall could block the

NTP access. If needed restart the projector and retry.

Code 10540: “projector - communication not initialized - projector control dis-
abled” (Error)

Situation

Solution

The ICMP module cannot
connect to the projector
controller board.

Restart the projector. If the problem persists, escalate the issue
including a log package from the system.

Code 10541: “projector - no messages available” (Error)

Situation

Solution

OBSOLETE

Code 10542: “projector - command rejected” (Error)

Situation

Solution

The command has been
rejected by the projector
because it is not supported.

Some projector models may not support all commands.

The command has been
rejected by the projector
because it is busy.

If the projector is busy, the command might be rejected.

Code 10543: “projector - macro execution error” (Error)

Situation

Solution

An error was detected during
the execution of a projector
macro.

Check the projector macro.

Check the connectivity between the ICMP and the projector.

R5906594 ICMP 09/11/2016

Summary of Contents for ICMP

































































































Search results

Summary of Contents for ICMP

Reviews:

Related manuals for ICMP

Brands by name

Popular brands

Barco ICMP, Service Manual

Search results

Summary of Contents for ICMP

Reviews:

Related manuals for ICMP

Brands by name

Popular brands