Barco ICMP Service Manual Download Page 40

Page: 40 / 96

4. Troubleshooting

Code 10595: “storage -

le system check already running -

le system check re-

jected” (Error)

Situation

Solution

The

le system check cannot

start because another

system operation is already
running.

Wait for the end of the previous

le system operation.

Code 10596: “storage -

le system check is not running - no status available”

(Error)

Situation

Solution

OBSOLETE

Code 10597: “storage -

le system check storage mounted -

le system check

rejected” (Error)

Situation

Solution

The

le system check cannot

start because the

le system

is mounted.

Restart the projector and retry.

Code 10598: “storage -

le system check failed -

le system check aborted” (Error)

Situation

Solution

The

le system check has

been aborted due to an
unexpected error.

Restart the projector and retry.

Code 10599: “storage -

le system check uncorrected errors - errors left uncor-

rected” (Warning)

Situation

Solution

The

le system check could

not

x all the errors. This

should not happen on a
normal storage.

Restart the projector and retry if needed.

Code 10600: “save show - invalid format - save show rejected” (Error)

Situation

Solution

The show cannot be saved
because the format of the
show data is incorrect.

Check the compliance of the show data.

The show cannot be saved
because the format of the
show data is not compatible
with the module version.

Check the compatibility between the Barco (Web) Commander or TMS
version and the ICMP version.

Code 10601: “save show - show id already exists - save show rejected” (Error)

Situation

Solution

The show cannot be saved
because the unique ID is
already registered in the
database.

Each time a show is modi

ed or created it must be assigned a new

UUID. The Barco (Web) Commander or TMS applications should take
care of that.

R5906594 ICMP 09/11/2016

Summary of Contents for ICMP

































































































Search results

Summary of Contents for ICMP

Reviews:

Related manuals for ICMP

Brands by name

Popular brands

Barco ICMP, Service Manual

Search results

Summary of Contents for ICMP

Reviews:

Related manuals for ICMP

Brands by name

Popular brands