Barco ICMP Service Manual Download Page 71

Page: 71 / 96

5. ICMP service procedure

5. ICMP SERVICE PROCEDURE

About this chapter

This chapter describes how to removal and installation instructions of the ICMP and ICMP HDD. Further-
more, the battery replacement, the RAID controller replacement and ICMP HDD are described as well.

Overview

•

Removing the ICMP

•

Installing the ICMP

•

Removing a HDD from the ICMP

•

Installing a HDD into the ICMP

•

Replacement of the battery

•

RAID controller replacement

5.1

Removing the ICMP

ARNING

Power down the projector and let it cool down before starting the installation

procedure. You will

nd in the installation manuals of each projector the way to switch

off your installation.

AUTION

Wear a wrist band which is connected to the ground while handling the elec-

trostatic discharge sensitive parts.

Necessary tools

•

7mm

at screwdriver.

•

PH2 Phillips screwdriver.

•

ESD wrist band.

How to remove the ICMP from the projector Card Cage?

1. Depending on the projector type the input cover of the projector has to be removed to access the

ation screws of the installed ICMP. Use a 7 mm

at screwdriver. For detailed instructions see User &

Installation manual of the projector.

2. Release the four retaining screws at the front of the ICMP (reference 1). Use a PH2 Phillips screwdriver.

3. Pull the ICMP out of its compartment.

Note:

All connections are made via the board to board connection with the back plane.

R5906594 ICMP 09/11/2016

Summary of Contents for ICMP

































































































Search results

Summary of Contents for ICMP

Reviews:

Related manuals for ICMP

Brands by name

Popular brands

Barco ICMP, Service Manual

Search results

Summary of Contents for ICMP

Reviews:

Related manuals for ICMP

Brands by name

Popular brands