Barco ICMP Service Manual Download Page 28

Page: 28 / 96

4. Troubleshooting

Code 10071: “system - I2C error reading Audio DSP temperature” (Error)

Situation

Solution

There was a problem with
the temperature sensor that
monitors the Audio DSP
temperature.

Restart the projector. If the problem persists, escalate the issue
including a log package from the system.

Code 10072: “system - I2C error reading ICP FPGA temperature” (Error)

Situation

Solution

There was a problem with
the temperature sensor that
monitors the ICP FPGA
temperature.

Restart the projector. If the problem persists, escalate the issue
including a log package from the system.

Code 10073: “system - I2C error reading IMB FPGA temperature” (Error)

Situation

Solution

There was a problem with
the temperature sensor that
monitors the IMB FPGA
temperature.

Restart the projector. If the problem persists, escalate the issue
including a log package from the system.

Code 10074: “system - I2C error reading Power PC temperature” (Error)

Situation

Solution

There was a problem with
the temperature sensor
that monitors the processor
temperature.

Restart the projector. If the problem persists, escalate the issue
including a log package from the system.

Code 10075: “system - HDD power error” (Error)

Situation

Solution

The power monitor detected
a fault on the Hard disk
power circuit.

Restart the projector. If the problem persists, escalate the issue
including a log package from the system.

Code 10076: “system - Video Mezzanine FPGA version mismatch” (Warning)

Situation

Solution

The

rmware version on the

Video Mezzanine add-on
board does not match the
ICMP software package.

Re-install the ICMP software package. If the problem persists, escalate
the issue.

Code 10501: “ICMP - unexpected error” (Error)

Situation

Solution

The operation has failed for
an unexpected reason.

Retry the operation. Restart the projector if the error still occurs. If
the problem persists, escalate the issue including a log package from
the system.

The ICMP reports a default
error status.

Restart the projector. If the problem persists, escalate the issue
including a log package from the system.

R5906594 ICMP 09/11/2016

Summary of Contents for ICMP

































































































Search results

Summary of Contents for ICMP

Reviews:

Related manuals for ICMP

Brands by name

Popular brands

Barco ICMP, Service Manual

Search results

Summary of Contents for ICMP

Reviews:

Related manuals for ICMP

Brands by name

Popular brands