Barco ICMP Service Manual Download Page 24

Page: 24 / 96

4. Troubleshooting

Code 10025: “formatter - red satellite sri link error” (Error)

Situation

Solution

There is a communication
error between ICMP and the
satellite.

Restart the projector. If the problem persists, escalate the issue
including a log package from the system.

Code 10026: “formatter - red satellite in reset” (Error)

Situation

Solution

The satellite is in the reset
state.

Restart the projector. If the problem persists, escalate the issue
including a log package from the system.

Code 10030: “formatter - green satellite thermal shutdown” (Error)

Situation

Solution

The satellite is in shutdown
due to over temperature.

Check the dust

lters, check the fan speeds in communicator. If the

problem persists, escalate the issue including a log package from the
system.

Code 10031: “formatter - green satellite offset under voltage” (Error)

Situation

Solution

The offset voltage on the
satellite is too low.

Restart the projector. If the problem persists, escalate the issue
including a log package from the system.

Code 10032: “formatter - green satellite reset under voltage” (Error)

Situation

Solution

The reset voltage on the
satellite is too low.

Restart the projector. If the problem persists, escalate the issue
including a log package from the system.

Code 10033: “formatter - green satellite bias under voltage” (Error)

Situation

Solution

The bias voltage on the
satellite is too low.

Restart the projector. If the problem persists, escalate the issue
including a log package from the system.

Code 10034: “formatter - green satellite con

guration error” (Error)

Situation

Solution

There was an error while
con

guring the satellite.

Restart the projector. If the problem persists, escalate the issue
including a log package from the system.

Code 10035: “formatter - green satellite sri link error” (Error)

Situation

Solution

There is a communication
error between ICMP and the
satellite.

Restart the projector. If the problem persists, escalate the issue
including a log package from the system.

Code 10036: “formatter - green satellite in reset” (Error)

Situation

Solution

The satellite is in the reset
state.

Restart the projector. If the problem persists, escalate the issue
including a log package from the system.

R5906594 ICMP 09/11/2016

Summary of Contents for ICMP

































































































Search results

Summary of Contents for ICMP

Reviews:

Related manuals for ICMP

Brands by name

Popular brands

Barco ICMP, Service Manual

Search results

Summary of Contents for ICMP

Reviews:

Related manuals for ICMP

Brands by name

Popular brands