Barco ICMP Service Manual Download Page 39 | Manualshive

Page: 39 / 96

background image

4. Troubleshooting

Code 10588: “storage - HDD 2 errors detected - possible HDD 2 failure” (Warning)

Situation

Solution

Errors have been detected on
HDD 2. This HDD is probably
going to fail.

Replace the HDD with a new one. A RAID rebuild operation will be
initiated automatically. The system should remain powered on until the
rebuild is complete. If a power cycling occurs during the rebuild a new
complete rebuild will start on next reboot.

Code 10589: “storage - HDD 3 errors detected - possible HDD 3 failure” (Warning)

Situation

Solution

Errors have been detected on
HDD 3. This HDD is probably
going to fail.

Replace the HDD with a new one. A RAID rebuild operation will be
initiated automatically. The system should remain powered on until the
rebuild is complete. If a power cycling occurs during the rebuild a new
complete rebuild will start on next reboot.

Code 10591: “check - requested content selected in player - cannot check con-
tent” (Error)

Situation

Solution

The content integrity cannot
be checked because the
content is selected in the
player.

Unload the content from the player and restart the integrity check
operation.

Code 10592: “check - requested content being ingested - cannot check content”
(Error)

Situation

Solution

The content integrity cannot
be checked because the
content is being ingested.

Wait for the end of ingest. The ingest process already checks the
content integrity in the same way.

Code 10593: “check - database error - cannot check content” (Error)

Situation

Solution

The content integrity cannot
be checked because a
database error has occurred.

Restart the projector. If the problem persists, escalate the issue
including a log package from the system.

The content integrity cannot
be checked because the
content is corrupted in the
database.

Delete the content and ingest it back. The ingest process is also
checking the content integrity.

Code 10594: “check - content check busy - cannot check new content” (Error)

Situation

Solution

The content integrity cannot
be checked because the
integrity of another content is
already being checked.

Wait for the end of the running integrity check or cancel it.

R5906594 ICMP 09/11/2016

35

«
...
37
38
39
40
41
...
»

Summary of Contents for ICMP

































































































Reviews:

No comments

Related manuals for ICMP

Brand: Samsung Pages: 2

Brand: 3onedata Pages: 3

Brand: IAdea Pages: 16

Brand: I-Tech Pages: 14

Brand: Champion Global Power Equipment Pages: 40

Brand: Sungrow Pages: 14

Brand: Senergy Pages: 50

Brand: Boss Audio Systems Pages: 5

Mediagate MG-450HD

Brand: AL Tech Pages: 100

Brand: Pro-Ject Audio Systems Pages: 20

Brand: Majella Pages: 6

STORAGE PACKAGE - BUSINESS

Brand: SMA Solar Technology AG Pages: 30

Brand: Cobalt Digital Inc Pages: 126

FR-S520-0.1K to 3.7K(-R)(-C)

Brand: Mitsubishi Pages: 55

Brand: tams elektronik Pages: 28

60 WATT SOLAR 12 VOLT POWER GENERATOR KIT

Brand: Sunforce Pages: 14

175-Watt Pocket Power Inverter

Brand: Enercell Pages: 10

Brand: Fronius Pages: 52

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands