Barco ICMP Service Manual Download Page 25

Page: 25 / 96

4. Troubleshooting

Code 10040: “formatter - blue satellite thermal shutdown” (Error)

Situation

Solution

The satellite is in shutdown
due to over temperature.

Check the dust

lters, check the fan speeds in communicator. If the

problem persists, escalate the issue including a log package from the
system.

Code 10041: “formatter - blue satellite offset under voltage” (Error)

Situation

Solution

The offset voltage on the
satellite is too low.

Restart the projector. If the problem persists, escalate the issue
including a log package from the system.

Code 10042: “formatter - blue satellite reset under voltage” (Error)

Situation

Solution

The reset voltage on the
satellite is too low.

Restart the projector. If the problem persists, escalate the issue
including a log package from the system.

Code 10043: “formatter - blue satellite bias under voltage” (Error)

Situation

Solution

The bias voltage on the
satellite is too low.

Restart the projector. If the problem persists, escalate the issue
including a log package from the system.

Code 10044: “formatter - blue satellite con

guration error” (Error)

Situation

Solution

There was an error while
con

guring the satellite.

Restart the projector. If the problem persists, escalate the issue
including a log package from the system.

Code 10045: “formatter - blue satellite sri link error” (Error)

Situation

Solution

There is a communication
error between ICMP and the
satellite.

Restart the projector. If the problem persists, escalate the issue
including a log package from the system.

Code 10046: “formatter - blue satellite in reset” (Error)

Situation

Solution

The satellite is in the reset
state.

Restart the projector. If the problem persists, escalate the issue
including a log package from the system.

Code 10050: “gip - no SMS.be communication” (Error)

Situation

Solution

The GIP module has failed
to connect with the SMS.be
module.

Restart the projector. If the problem persists, escalate the issue
including a log package from the system.

Code 10051: “gip - write to SMS.be failed” (Error)

Situation

Solution

The GIP module could not
send a command to the
SMS.be module.

Retry the action. Restart the projector. If the problem persists, escalate
the issue including a log package from the system.

R5906594 ICMP 09/11/2016

Summary of Contents for ICMP

































































































Search results

Summary of Contents for ICMP

Reviews:

Related manuals for ICMP

Brands by name

Popular brands

Barco ICMP, Service Manual

Search results

Summary of Contents for ICMP

Reviews:

Related manuals for ICMP

Brands by name

Popular brands