X90 mobile modules
X90 mobile system User's manual V 1.20 - Translation of the original manual
147
5.4 Condition monitoring
5.4.1 X90CM480.04-00
5.4.1.1 General information
With the modular X90 mobile controller and I/O system, B&R is opening up new possibilities in mobile automation.
The comprehensive set of standardized components makes the X90 mobile system perfect for implementing flex-
ible automation concepts.
Option board X90CM480.04-00 provides a compact system for measuring and analyzing vibrations for use in
applications such as condition monitoring for machinery and equipment.
The measurement unit consists of 4 vibration inputs with 24-bit converter resolution and a sampling frequency of
51.562 kHz. Each of the inputs has a separately switchable constant current source for supplying power to the
IEPE sensors.
The option board integrates numerous algorithms for signal processing. These include configurable high and low
pass filters, envelope generation and Fourier transformation.
Various parameters and configurable frequency bands are available to ensure seamless signal evaluation. The
module performs calculations internally to minimize the load on the bus and CPU.
Whether used for traditional condition monitoring or as a means of process optimization, the maximum evaluable
frequency of 10 kHz and maximum frequency resolution of under 63 mHz make the option board suitable for almost
any application. If desired, the option board can also be used as a standard input module.
The ability to upload all values in the time and frequency domain also allows measurements to be evaluated
externally or archived.
•
4-channel vibration measurement and analysis module
•
24-bit resolution at 51.562 kHz
•
IEPE power supply
•
Extensive characteristic value calculation in the module
•
Data buffer upload
5.4.1.2 Order data
Model number
Short description
Figure
Condition Monitoring
X90CM480.04-00
X90 mobile condition monitoring, option board for vibration mea-
surement and vibration analysis of condition monitoring tasks, 4
IEPE analog inputs
Optional accessories
Sensor cable
0ACC0020.01-1
Cable for accelerometer, length 2 m 2x 0.34 mm², female M12
connector on the sensor side, can be used in cable drag chains,
UL listed
0ACC0050.01-1
Cable for accelerometer, length 5 m 2x 0.34 mm² female M12
connector on the sensor side, can be used in cable drag chains,
UL listed
0ACC0100.01-1
Cable for accelerometer, length 10 m 2x 0.34 mm², female M12
connector on the sensor side, can be used in cable drag chains,
UL listed
0ACC0150.01-1
Cable for accelerometer, length 15 m 2x 0.34 mm², female M12
connector on the sensor side, can be used in cable drag chains,
UL listed
0ACC0200.01-1
Cable for accelerometer, length 20 m 2x 0.34 mm², female M12
connector on the sensor side, can be used in cable drag chains,
UL listed
0ACC0500.01-1
Cable for accelerometer, length 50 m 2x 0.34 mm², female M12
connector on the sensor side, can be used in cable drag chains,
UL listed
0ACC1000.01-1
Cable for accelerometer, length 100 m 2x 0.34 mm², female M12
connector on the sensor side, can be used in cable drag chains,
UL listed
Sensors
0ACS100A.00-1
Accelerometer, nominal sensitivity 100 mV/g, top exit
0ACS100A.90-1
Accelerometer, nominal sensitivity 100 mV/g, side exit
Table 19: X90CM480.04-00 - Order data
