Baldor VS1MXS51, Installation & Operating Manual

Page: 69 / 88

Parameter Tables B-3 MN762S
Param
#
Access Parameter Name Description (Range)
Factory
Setting
User
Setting
P0-56 RO Droop Speed Internal value Read Only
P0-57 RO Encoder Speed -P1-06 to P1-06 Read Only
P0-58 RO Speed Jump Zone Internal value Read Only
P0-59 RO
Modbus Write
Command Data Value
Register dependent Read Only
P0-60 RO Motor Control Loop ID 0 … 65535 Read Only
P1-01 RW Motor Rated Voltage 0, 20 to 600 575
P1-02 RW Motor Rated Current
25% -100% of drive rated
current Drive
rating
P1-03 RW Motor Rated Frequency 25Hz to 2000Hz 60
P1-04 RW Motor Rated Speed 0 to 60000 rpm 0
P1-05 RW
Minimum Frequency /
Speed
0.0 to P1-06 0.0
P1-06 RW Maximum Freq. / Speed P1-05 to 5*P1-03 (max 2000Hz) 60.0
P1-07 RW
Terminal / Keypad / PID
Drive Control Mode
Selection
0: Terminal control
1: Keypad control – fwd only
2: Keypad control – fwd and rev
3: PID Control
4: Modbus RTU Control
0
P1-08 RW
Digital Input Function
Select
0 to 22 0
P1-09 RW Stop Mode Select
0 : Ramp to stop
1 : Coast to stop
2 : Ramp to stop with ‘fast stop’
0
P1-10 RW
Acceleration Ramp
Time
0.0 to 3000.0 5.0
P1-11 RW
Deceleration Ramp
Time
0.0 to 3000.0 5.0
P1-12 RW Energy Optimizer 0: Disabled 1: Enabled 0
P1-13 RO Trip Log Last four trips stored Read only
P1-14 RW Extended Menu Access Code 0 to 30000 0
P2-01 RW Preset Speed 1 -P1-06 to P1-06
50.0
(60.0)
P2-02 RW Preset Speed 2 -P1-06 to P1-06 0.0
P2-03 RW Preset Speed 3 -P1-06 to P1-06 0.0
P2-04 RW Preset Speed 4 -P1-06 to P1-06 0.0
P2-05 RW Preset Speed 5 -P1-06 to P1-06 0.0
P2-06 RW Preset Speed 6 -P1-06 to P1-06 0.0
P2-07 RW Preset speed 7 -P1-06 to P1-06 0.0
Table B-1 Parameters Sorted by Parameter Number Continued