Baldor VS1MXS51, Installation & Operating Manual

Page: 38 / 88

7-4 Parameter Descriptions MN762S
7.3 Extended Parameters
7.3.1 Parameter Group 2 – Extended Parameters
Table 7-2 Parameter Group 2 - Extended Parameters
Par No. Description Range Units Default Explanation
P2-01 Preset Speed 1 -P1-06 to P1-06 Hz / Rpm
50.0
(60.0)
Sets the speed the drive runs at
when Preset Speed 1 is selected.
P2-02 Preset Speed 2 -P1-06 to P1-06 Hz / Rpm 0.0 Sets jog / preset speed 2
P2-03 Preset Speed 3 -P1-06 to P1-06 Hz / Rpm 0.0 Sets jog / preset speed 3
P2-04 Preset Speed 4 -P1-06 to P1-06 Hz / Rpm 0.0 Sets jog / preset speed 4
P2-05 Preset Speed 5 -P1-06 to P1-06 Hz / Rpm 0.0 Sets jog / preset speed 5
P2-06 Preset Speed 6 -P1-06 to P1-06 Hz / Rpm 0.0 Sets jog / preset speed 6
P2-07 Preset speed 7 -P1-06 to P1-06 Hz / Rpm 0.0 Sets jog / preset speed 7
P2-08 Preset speed 8 -P1-06 to P1-06 Hz / Rpm 0.0 Sets jog / preset speed 8
P2-09 Skip frequency P1-05 to P1-06 Hz / Rpm 0.0
Centre point of skip frequency
band set up in conjunction with
P2-10
P2-10
Skip frequency
band
0 to P1-06 Hz / Rpm 0.0
Width of skip frequency band
centered on frequency set in
P2-09
P2-11
Analog output /
Digital Output 1
Function select
Digital Output
Mode
0: Drive enabled
1: Drive healthy
2: Motor at
target speed
3: Motor Speed
>0
4: Motor speed
>= limit
5: Motor torque
>= limit
6: 2nd Analog
Input >= limit
Analog Output
Mode
7: Motor speed
8: Motor torque
9: Motor power
10: Motor current
7
Digital Output Mode
Logic 1 = +24V DC
0: Logic 1 when the drive is
enabled (Running)
1: Logic 1 When no Fault
condition exists on the drive
2: Logic 1 when the motor
speed matches the set point
speed
3: Logic 1 when the motor runs
above zero speed
Options 4 to 6: the Digital
output is enabled using the
level set in P2-12h and
P2- 12L
Analog Output Mode
7: Motor Speed, 0 to 10V = 0
to P1-06
8: Motor torque, 0 to 10V = 0
to 200% of motor rated
torque
9: Motor power, 0 to 10V = 0 to
150% of drive rated power
10: Motor Current, 0 to 10V = 0
to 200% of P1-02