Baldor VS1MXS51, Installation & Operating Manual

Page: 35 / 88

Parameter Descriptions 7-1 MN762S
7.1 Overview
Parameters are presented in this Chapter and each setting is explained. Selecting P00 and pressing
ENT/PROG accesses a read-only menu to monitor internal drive values. Once in the display view, the
UP and DOWN arrows will scroll between the read only variables shown in Tables 7-5 and 7-8.
7.2 Basic Parameters
Table 7-1 Basic Parameters - Parameter Group 1
Par
No.
Description Range Units Default Explanation
P1-01
Motor rated
voltage
0, 20 to 600 Volts 575
Rated (nameplate) voltage of
the motor (Volts).
P1-02
Motor rated
current 25% -100% of drive
rated current
Amps
Drive
rating
Enter the rated (nameplate)
current of the motor. This value
is used for overload protection.
P1-03
Motor rated
frequency
25Hz to 2000Hz Hz 60
Enter the rated (nameplate)
frequency of the motor.
P1-04
Motor rated
speed
0 to 60 000 rpm Rpm 0
When non-zero, all speed
related parameters are
displayed in rpm. Enter the
motor rated (nameplate) speed
if this is required.
P1-05
Minimum
Frequency /
Speed
0.0 to P1-06
Hz
Rpm
0.0
Minimum speed limit – Hz or
rpm.
If P1-04 >0, the value entered
is in Rpm.
P1-06
Maximum
Frequency /
Speed
P1-05 to 5*P1-03
(max 2000Hz) Hz
Rpm
60.0
Maximum speed limit – Hz or
rpm.
If P1-04 >0, the value entered
is in Rpm.
P1-07
Terminal /
Keypad /
PID / Drive
Control Mode
Selection
0: Terminal control
1: Keypad control –
fwd only
2: Keypad control –
fwd and rev
3: PID Control
4: Modbus RTU
Control
- 0
Primary Control Mode of the
drive.
0: Terminal control
1: Uni-directional keypad
control. Keypad START
button does not reverse
direction.
2: Bi-directional keypad
control. Keypad START
button toggles between
forward and reverse.
3: User PID control with
external feedback signal.
4: Modbus RTU Control.
Chapter 7
Parameter Descriptions