Baldor VS1MXS51, Installation & Operating Manual

Page: 56 / 88

7-22 Parameter Descriptions MN762S
7.4.3 Additional Parameter Group 0 – Monitoring Parameters
Table 7-8 Additional Parameter Group 0 - Monitoring Parameters
Par
No.
Description Range Units Default Explanation
P0-31 Drive Serial Number #2
P0-32 DSP Bootloader Version E.g. “ 1.00”
P0-33 Measured Cos phi E.g. 0.78
P0-34 Comms Error Count (DSP) 0 … 65535
P0-35 Configuration Register Value Internal value
P0-36 Digital Input Status Internal value
P0-37 Analog Out Internal Value Internal value
P0-38 Current Phase U Offset Internal value
P0-39 Current Phase U Ref Internal value
P0-40 Current Phase V Offset Internal value
P0-41 Current Phase V Ref Internal value
P0-42 Brake Resistor Max on Time Time in milliseconds
P0-43 Brake Resistor Duty Cycle Internal value
P0-44 Uq Internal Ref Value Internal value
P0-45 Ud Internal Ref Value Internal value
P0-46 Measured Spin Start Speed Internal value
P0-47 Calculated Slip Speed Value
Internal value
(V/F mode only)
P0-48 Hoist Boost Speed Internal value
P0-49 Rated Iq Internal Value Internal value
P0-50 Motor Voltage V ph-ph (rms)
P0-51 Switching Frequency Internal Internal value
P0-52 Speed Hysteresis Value Internal value
P0-53 PID DC Bus Feedback Value 0..4096
P0-54 Modbus Comms Error 0 … 65535
P0-55 Modbus Speed Reference Internal value
P0-56 Droop Speed Internal value