Baldor VS1MXS51, Installation & Operating Manual

Page: 31 / 88

Using the Keypad 6-3 MN762S
6.4 Reset Factory Default Settings
Press the UP, DOWN, STOP and START keys simultaneously for > 2 seconds.
The display shows
 indicating the drive has reset itself to factory default parameters. Press the
STOP button to acknowledge and reset the drive.
6.5 Advanced Keypad Operation Short Cuts
Table 6-3 Advanced Keypad Short Cuts
Procedure Display
shows:
Procedure Display
shows:
Procedure
Power on Drive

Power on Drive

Power on Drive
Press and hold
the for >2
seconds

Press and hold
the for >2
seconds

Press and hold
the for >2
seconds
Press the key  Press the key  Press the key
The and
can be used to
select the desired
parameter  etc...
The and
can be used to
select the desired
parameter  etc...
The and
can be used to
select the desired
parameter
Select the required
parameter, e.g.
P1-02

Select the required
parameter, e.g. P1-02

Select the required
parameter, e.g.
P1-02
Press the key  Press the key  Press the key
The parameter value
is now adjusted and
automatically stored.
Press the key
for >2 seconds to
return to operating
mode.

The parameter value
is now adjusted and
automatically stored.
Press the key
for >2 seconds to
return to operating
mode.

The parameter value
is now adjusted and
automatically stored.
Press the key
for >2 seconds to
return to operating
mode.
STOP
RESET
START
PROG
ENT
PROG
ENT
PROG
ENT
PROG
ENT
PROG
ENT
PROG
ENT
PROG
ENT
PROG
ENT
PROG
ENT