Baldor VS1MXS51, Installation & Operating Manual

Page: 39 / 88

Parameter Descriptions 7-5 MN762S
Par No. Description Range Units Default Explanation
P2-12h
Digital Output
Control
High Limit
0.0 to 200.0 % 100.0
With P2-11 = 4 to 6, Digital
Output 1 is set to Logic 1 (+24V
DC) when the value set in P2-
12h is exceeded, and returns to
Logic 0 (0V) when the selected
value reduces below the limit set
in P2-12L
P2-12L
Digital Output
Control
Low Limit
0.0 to P2-12h % 100.0
P2-13
User Relay
Output
Function Select
0: Drive enabled
1: Drive healthy
2: Motor at target
speed
3: Motor Speed
>0
4: Motor speed
>= limit
5: Motor torque
>= limit
6: 2nd Analog
Input >= limit
1
Selects the function assigned to
the relay output.
0: Logic 1 when the drive is
enabled (Running)
1: Logic 1 When no Fault
condition exists on the drive
2: Logic 1 when the motor
speed matches the set point
speed
3: Logic 1 when the motor runs
above zero speed
Options 4 to 6 : the Digital
output is enabled using the
level set in P2-14h and
P2-14L
P2-14h
Relay Output
Control
High Limit
0.0 to 200.0 % 100.0
With P2-13 = 4 to 6, the User
Relay Output is set to Logic 1
(+24V DC) when the value set in
P2-14h is exceeded, and returns
to Logic 0 (0V) when the selected
value reduces below the limit set
in P2-12L
P2-14L
Relay Output
Control
Low Limit
0.0 to P2-14h % 100.0
P2-15
Relay Output
Mode
0: Normally Open
1: Normally
Closed
- 0
Inverts the operating status of
the User Relay
0: Logic 1 = Relay Contacts
Closed
1: Logic 1 = Relay Contacts
Open
The drive must be powered for
the contacts to close
P2-16
Zero Speed
Holding Time
0.0 to 60.0 Seconds 0.2
Determines the time for which
the drive output is held at zero
speed when stopping, before the
drive output is disabled.
Table 7-2 Parameter Group 2 - Extended Parameters Continued