Baldor VS1GV21-1B, Installation & Operating Manual

Page: 69 / 204

Using the Keypad 6-7 MN765
6.5 Save Parameter Values
The keypad keys and display work with the memory of the control. When a parameter value is displayed, the displayed value
is the value stored in control memory. The changes are written to non-volatile memory and are stored even when power is
removed. Normal control operation can resume when power is restored.
Keypad memory is only used to backup the four parameter tables stored in control memory. This means that after the
parameters are configured for the application and the control operation is as desired, a copy of the parameters can be
saved to keypad memory as a backup copy. This backup copy can be restored at any time. This is useful to restore program
operation after a firmware update or to make several controls operate the same. It prevents having to make the changes to
each control individually.
Action Description Display Comments
Press Menu Go to the Advanced Prog
Level 1 Keypad Setup block.
PRESET SPEEDS
RAMP RATES
JOG SETTINGS
KEYPAD SETUP
INPUT SETUP
Press “Enter” to select.
Press Enter to edit
Keypad Setup
parameters.
Scroll to
PARAMS TO KEYPAD
PROG
F1310
PARAMS TO KEYPAD
No
KEYPAD SETUP
STATUS BACK
Press “Enter” to change
parameter value.
Note that T1 is missing from the
parameter number. It is not part
of the stored parameter table
values T1, T2, T3 and T4.
Press Enter to edit
parameter.
EDIT
F1310
PARAMS TO KEYPAD
Yes
KEYPAD SETUP
STATUS BACK
Press to change value to YES.
Press Enter to load the
parameter table values
from control memory to
keypad memory.
PROG
F1310
PARAMS TO KEYPAD
No
KEYPAD SETUP
STATUS BACK
Press “F2” to return to Keypad
Setup menu.
STATUS BACK
A copy of all four parameter tables have now been saved to non-volatile keypad memory.