Baldor VS1GV21-1B, Installation & Operating Manual, Page: 179 / 204

Parameter Tables B-7 MN765
Block Title Parameter P# Adjustable Range Factory User Setting
MOTOR
CONTROL
(Continued)
CUSTOM V/F CURVE [2] [4] 1617 0-Off
1-3 Point
2-7 Point
0
3 POINT VOLTAGE [2] [4] 1618 0.0 - 100.0% 0.0
3 POINT FREQ
[2] [4]
1619 0.00 - maximum output
speed P2003 Hz
30.00
SLIP COMP ENABLE [2] [4] 1620 0-Off
1-On
0
7 POINT FREQ 1
[2] [4]
1621 0 - MAX Speed RPM 300
7 POINT VOLT 1 [2] [4] 1622 0.0 - 100.0% 16.7
7 POINT FREQ 2 [2] [4] 1623 0 - MAX Speed RPM 600
7 POINT VOLT 2
[2] [4]
1624 0.0 - 100.0% 33.3
7 POINT FREQ 3 [2] [4] 1625 0 - MAX Speed RPM 900
7 POINT VOLT 3 [2] [4] 1626 0.0 - 100.0% 50.0
7 POINT FREQ 4
[2] [4]
1627 0 - MAX Speed RPM 1200
7 POINT VOLT 4 [2] [4] 1628 0.0 - 100.0% 66.7
7 POINT FREQ 5 [2] [4] 1629 0 - MAX Speed RPM 1500
7 POINT VOLT 5
[2] [4]
1630 0.0 - 100.0% 83.3
FEEDBACK ALIGN [3] [4] 1631 0-Forward
1-Reverse
0
FEEDBACK FILTER
[3] [4]
1632 1 - 7 4
CURR PROP GAIN [1] [4] 1633 0.00 - 150.00 CALC
CURR INT GAIN [1] [4] 1634 0.0 - 3000.00 Hz 150.00
SPEED PROP GAIN
[1] [4]
1635 0.0 - 1000.0 5.00
SPEED INT GAIN [1] [4] 1636 0.00 - 1000.00 Hz 10.00
SPEED DIFF GAIN [1] [4] 1637 0.00 - 1.00 0.00
POSITION GAIN
[3] [4]
1638 0.0 - 1000.0 8.0
A.S. PROP GAIN [1] 1639 0.0 - 255.0 10.0
A.S. INT GAIN [1] 1640 0.00 - 200.00 Hz 50.0
MOTOR Xm
[1] [4]
1641 0.00 - 1000.00 Ohms CALC
MOTOR R1 [4] 1642 0.00 - 1000.00 Ohms 0
MOTOR X1 [1] [4] 1643 0.000 - 1000.000 Ohms CALC
ROTOR TIME CONST [4] 1644 0.000 - 60.000 seconds CALC
MOTOR R2 [1] [4] 1645 0 - 1000 Ohms CALC
MOTOR X2
[1] [4]
1646 0 - 1000 Ohms CALC
TRICKLE HEAT AMPS 1678 0.0 - 50.0% of Motor Rated
Amps
0.0
[1] Only available or active in Closed/Open Vector mode. Ignore these parameters for V/F mode.
[2] Only available or active in V/F mode. Ignore these parameters for Closed/Open Vector mode.
[3] Only available or active in Closed Vector mode. Ignore these parameters for Open Vector or V/F modes.
[4]
Motor related parameters (see parameter P1311).
Table B-1 Parameter Block Values Level 1 (Cont.)