Baldor VS1GV21-1B, Installation & Operating Manual, Page: 111 / 204

Parameter Descriptions 7-33 MN765
Block Title Parameter (Number)
Selection (Value)
Parameter Name and Description
PULSE
FOLLOW-
ER
(Continued)
SAVE RX OUT RATI (3114) Preset Value: 0
Range: 0 – 1
No (0) Does not save values to non-volatile memory.
Yes (1) Saves values to non-volatile memory.
Determines whether or not receive output ratios are saved to non-volatile
memory so that they are retained upon loss of drive power.
CUSTOM
UNITS
MAX DEC PLACES (3201) Preset Value: 1
Range: 0 - 5
0 Zero decimal places for the Custom Units display.
1 One decimal place for the Custom Units display.
2 Two decimal places for the Custom Units display.
3 Three decimal places for the Custom Units display.
4 Four decimal places for the Custom Units display.
5 Five decimal places for the Custom Units display.
The number of decimal places for the Custom Units display.
VALUE AT SPEED (3202) Preset Value: 0.0: 0RPM
Range: 0.0 - 9999999.0 (X.X: YRPM)
Sets the desired output rate per RPM of motor speed for the Custom Units
display. This parameter provides scaling. Normal status display used until
“y” is set to a non-zero value. The value “X.X” is displayed at “Y” RPM.
Note that “Y” RPM is programmed in parameter P3204 when using Mint
WorkBench.
UNITS OF MEASURE (3203) Preset Value: Cust
Range: ASCII & Graphic Characters
Allows user specified units of measure to be displayed for the Custom
Units display. Characters are selected from display using  and  keys.
More characters are available (press MORE “F1” on keypad) for additional
characters.
PRESET
POSI-
TION
PRESET REVs 2 (3301)
PRESET REVs 3 (3302)
PRESET REVs 4 (3303)
PRESET REVs 5 (3304)
PRESET REVs 6 (3305)
PRESET REVs 7 (3306)
Preset Value: 1
Preset Value: 2
Preset Value: 3
Preset Value: 4
Preset Value: 5
Preset Value: 6
Range: -49,999 to +49,999
Sets integral number of revolutions for preset number position ((2 (3301)
through 7 (3306)). Preset position number ((2 (3301) through 7 (3306)) is an
absolute move relative to the home position.
PRESET REVs 8 (3307)
PRESET REVs 9 (3308)
PRESET REVs 10 (3309)
PRESET REVs 11 (3310)
PRESET REVs 12 (3311)
PRESET REVs 13 (3312)
PRESET REVs 14 (3313)
PRESET REVs 15
(3314)
Preset Value: 7
Preset Value: 8
Preset Value: 9
Preset Value: 10
Preset Value: 11
Preset Value: 12
Preset Value: 13
Preset Value: 14
Range: -49,999 to +49,999
Sets integral number of revolutions for preset position number ((8 (3307)
through 15 (3314)). Preset position number ((8 (3307) through 15 (3314)) is an
incremental move relative to the present position.
Table 7-3 Level 3 Parameter Block Definitions Continued