Baldor VS1GV21-1B, Installation & Operating Manual, Page: 115 / 204

Parameter Descriptions 7-37 MN765
Block Title Parameter (Number)
Selection (Value)
Parameter Name and Description
RTC
FEATURES
(Continued)
RTC ACTION 1 (3601)
RTC ACTION 2 (3602)
(Continued)
D.Out1 On/Reset (16)
D.Out1 Off/Reset (17)
R.Out1 On/IncP107 (18)
R.Out1 Off/IncP107 (19)
R.Out1 On/DecP107 (20)
R.Out1 Off/DecP107 (21)
R.Out1 On/Reset (22)
R.Out1 Off/Reset (23)
First action taken as a result of an edge from the RTC. See Chapter 12.
Second action taken as a result of an edge from the RTC. See Chapter 12.
RTC MESSAGE 1 (3603)
RTC MESSAGE 2 (3604)
Preset Value: 0
Preset Value: 0
Range: 0 - 8
None (0)
Clean Filter (1)
Change Filter (2)
Apply Oil/Lube (3)
Lube Mtr. Brngs (4)
Service Drive (5)
Service Coolant (6)
Service Heating (7)
RTC Alarm (8)
First message sent as a result of an edge from the RTC. See Chapter 12.
Second message sent as a result of an edge from the RTC. See Chapter 12.
ACT 1 QUALIFIER
(3605)
ACT 2 QUALIFIER
(3606)
Preset Value: 0
Preset Value: 0
Range: 0 - 6
Once (0)
Second (1)
Minute (2)
Hourly (3)
Daily (4)
Monthly (5)
Yearly (6)
Schedule qualifier for the RTC action 1. See Chapter 12.
Schedule qualifier for the RTC action 2. See Chapter 12.
Table 7-3 Level 3 Parameter Block Definitions Continued