Baldor VS1GV21-1B, Installation & Operating Manual, Page: 66 / 204

6-4 Using the Keypad MN765
6.3 Menu Display
After power-up the display shows the Status screen. Press the Menu key to display menu options.
Action Description Display Comments
Status Display
STATUS
STOP LOCAL
DIAG 0.00r MAIN
0.0V 0RPM
0.0A 0.0HZ
Press Menu/Esc Displays top level menu options.
DIAG BACK
STATUS
BASIC PARAMS
ADVANCED PROG
EVENT LOG
DIAGNOSTICS
Press or to move cursor over
the desired selection the press
“Enter” to select and display the
selection.
6.4 Basic Params
From the Menu display screen, select Basic Params and press Enter.
Parameter Status
All programmable parameters are displayed with an “F” at the bottom center of the display. “F” means it is the factory
setting value. “C” means it is a custom value set by the user. “V” means the parameter value may be viewed but not
changed while the motor is operating. If the parameter is displayed with an “L”, the value is locked and may not be changed
until the security code is entered.
Action Description Display Comments
Basic Params Display Control type display. The
parameter number “1601” is given
at the bottom center of the
display. “F”1601 indicates it is at
the factory setting and has not
been changed.
BASIC
STATUS F1601T1 BACK
CONTROL TYPE
V/F Control
MOTOR CONTROL
Press Enter to select the
parameter and press the or
keys to change the preset value
to a different control type.
Press enter when finished to exit
and save the new value or F2 to
exit without saving.
Press to go to the
next Basic Params
screen.
BASIC
STATUS F2401T1 BACK
MOTOR RATED VOLT
240.0 V
MOTOR DATA
T1 indicates the Table Number or
the parameter list in use. Four
parameter tables are available,
T1, T2, T3 or T4
(See Level 2, Drive Config, Active
Param Table parameter P0052.)
Press to go to the
next Basic Params
screen.
BASIC
STATUS F2402T1 BACK
MOTOR RATED AMPS
9.6 A
MOTOR DATA
Press to go to the
next Basic Params
screen.
BASIC
STATUS F2405T1 BACK
MOTOR MAG AMPS
3.1 A
Press to go to the
next Basic Params
screen.
BASIC
STATUS F2403T1 BACK
MOTOR RATED SPD
1754 RPM
MOTOR DATA
MOTOR DATA
Press to go to the
next Basic Params
screen.
BASIC
STATUS F2416T1 BACK
MOTOR RATED HP
10.0 HP
MOTOR DATA