Baldor VS1GV21-1B, Installation & Operating Manual, Page: 139 / 204

PLC Mode Description 10-7 MN765
ID Description
69
Reset PLC – If the input condition is True then a PLC reset is performed. All timers are expired and all logical variables
are set to FALSE. Comparators are not affected.
70- 99
Jump 0-29 – If the input condition is True then a jump from the current rung number to the specified rung number
is performed. Skipped rungs are not executed. Only forward jumps are allowed. Jumps from high to lower rungs or
jumps to the same rung number result in an error.
150 Heater - If the input condition is true then trickle current heating is enabled else it is disabled.
Table 10-4 Preset Speed Select Index
ID of PLC Actions
Description
28 27 26 25
0 0 0 0 Preset Speed 1 (P1001) Selected
0 0 0 1 Preset Speed 2 (P1002) Selected
0 0 1 0 Preset Speed 3 (P1003) Selected
0 0 1 1 Preset Speed 4 (P1004) Selected
0 1 0 0 Preset Speed 5 (P1005) Selected
0 1 0 1 Preset Speed 6 (P1006) Selected
0 1 1 0 Preset Speed 7 (P1007) Selected
0 1 1 1 Preset Speed 8 (P1008) Selected
1 0 0 0 Preset Speed 9 (P1009) Selected
1 0 0 1 Preset Speed 10 (P1010) Selected
1 0 1 0 Preset Speed 11 (P1011) Selected
1 0 1 1 Preset Speed 12 (P1012) Selected
1 1 0 0 Preset Speed 13 (P1013) Selected
1 1 0 1 Preset Speed 14 (P1014) Selected
1 1 1 0 Preset Speed 15 (P1015) Selected
1 1 1 1 Zero Speed (Not Defined) Selected
Table 10-5 Parameter Table Select Index
ID of PLC Actions
Description
36 35
0 0 Parameter Table 1 (P52 set to T1) Selected
0 1 Parameter Table 2 (P52 set to T2) Selected
1 0 Parameter Table 3 (P52 set to T3) Selected
1 1 Parameter Table 4 (P52 set to T4) Selected
Table 10-3 PLC Actions Continued