Configuring Properties for Command Workgroup
68
n
Avid recommends, for servers and workstations joining multiple workgroups, you configure the
Lookup tab to specify the FQDN of the Lookup services in both workgroups regardless of whether the
server or workstation is in the same subnet as the Lookup service.
To configure the properties for the Command Workgroup on the video server:
1. Click the Start button, and then select All Programs > Avid > Service Framework >
Avid
Workgroup Properties
.
2. On the Lookup tab, click the Add button under the Workgroup section—the far left button at the
bottom.
The Add Workgroup dialog box will open on top of the
Avid Workgroup Properties
window, as
shown:
3. Enter the name of the Command workgroup. It is case sensitive.
4. Click OK. The name you entered will appear in the Workgroup section of the
Avid Workgroup
Properties
window.
5. Click the Add button under the Lookup services section (located above the Apply button, and not
the one to the far left).
The Add Lookup Service dialog box will open on top of the
Avid Workgroup Properties
window,
as shown:
Summary of Contents for MediaCentral Command
Page 1: ...MediaCentral Command Installation and Configuration Guide...
Page 192: ...Index 192...
Page 193: ......
