Configuring Avid Workgroup Properties
118
7. When the Ready to Install the Program dialog box appears, click Install.
8. When the installation is complete, click Finish.
After the installation, if you need to alter the system name from the default, which is
command
, see
the procedure provided in
“Configuring a Second Command System” on page 57
Configuring
Avid Workgroup Properties
If the Command Workstation is in a different subnet than the Command Servers, you must add the
server names to the Lookup tab in
Avid Workgroup Properties
on the workstation.
To configure
Avid Workgroup Properties
:
1. Click the Start button, and then select All Programs > Avid > Service Framework >
Avid
Workgroup Properties
.
2. On the Lookup tab, click the Add button under the Workgroup section.
The Add Workgroup dialog box will open on top of the
Avid Workgroup Properties
window, as
shown:
Summary of Contents for MediaCentral Command
Page 1: ...MediaCentral Command Installation and Configuration Guide...
Page 192: ...Index 192...
Page 193: ......
