Install the Avid Remote Communication Service
131
Although the Avid Remote Communication Service can be installed on any computer in the
Command workgroup, Avid recommends it be installed on the Command Server. It should be
selected as one of the services installed during the Command Server installation procedure. See the
step about selecting services from the Custom Setup dialog box in
Command on the Server” on page 29
for more information.
If you did not install this service when originally setting up the Command Server, or if you want to
install it on a different computer, such as a Command Workstation, you can still do so.
Possible scenarios for install locations are:
•
Install the service on the Command Server.
•
Install the service on a Command Workstation.
•
Install the service on a computer in the studio and route connection between studio computer and
the Command Server.
The following procedure is based on installing the service on a computer that already has Command
software installed on it. Steps might vary if installing on a new computer without Command software
already on it.
To install the Avid Remote Communication Service:
1. Insert the Command installation CD (or access the install program from the network).
2. When the Welcome dialog box appears, click Next.
The Program Maintenance dialog box appears.
3. Select Modify and click Next.
The Custom Setup dialog box appears.
Summary of Contents for MediaCentral Command
Page 1: ...MediaCentral Command Installation and Configuration Guide...
Page 192: ...Index 192...
Page 193: ......
