Figure 25: Identify new critical points (P11, P12, P13, P14, P15, P16, P17)
Use the following procedure to mark additional cell boundaries and define the extent of the
coverage area.
Demarcate additional cell boundaries to cover all areas of the building
Identifying critical points on the floor
on page 45 to
and labeling new critical points
on page 52 as necessary to mark new cell boundaries
at the middle of the building.
Critical points P11, P13 and P16 form the following:
• contours in
Figure 26: Contours formed by critical points P11, P13, and P16
on
page 56
• the cell center 1C5 in
Figure 27: Cell center 1C5 formed by critical points P11,
on page 56
• a new cell boundary in
Figure 28: Cell boundary 1C5 formed by critical points P11,
on page 57
Critical points P11, P12, and P17 form the following:
• contours in
Figure 29: Example of critical point cell boundaries
on page 57
• a new boundary based on cell center 1C6 in
Figure 30: Example of cell center
System deployment
SIP DECT Fundamentals
October 2012 55
Summary of Contents for CS 1000
Page 6: ...6 SIP DECT Fundamentals October 2012 ...
Page 146: ...System administration 146 SIP DECT Fundamentals October 2012 Comments infodev avaya com ...
Page 174: ...System maintenance 174 SIP DECT Fundamentals October 2012 Comments infodev avaya com ...
Page 204: ...Site survey example 204 SIP DECT Fundamentals October 2012 Comments infodev avaya com ...
