Avaya CS 1000 Fundamentals Download

Page: 213 / 270

Testing the deployment handset

Figure 57: Handset display and keypad details

Entering the monitor mode

1. Ensure that the basestation is installed and supplied with power.

2. To turn the handset on, press the

Shift

key and press the

ON/OFF

button.

DECT HANDSET

appears on the handset display.

3. To select system mode, press the

Shift

key and press the

Local

key.

SYSTEM

appears on the handset display.

4. To select monitor mode, press the

star (*)

key.

MONITOR MODE

appears on the handset display.

5. To select the monitor mode code, press the

lock

button.

CODE

appears on the handset display.

Prepare the tool for deployment

SIP DECT Fundamentals

October 2012 213

Summary of Contents for CS 1000















































































































































































































































































Search results

Summary of Contents for CS 1000

Reviews:

Related manuals for CS 1000

Brands by name

Popular brands

Avaya CS 1000, Fundamentals

Search results

Summary of Contents for CS 1000

Reviews:

Related manuals for CS 1000

Brands by name

Popular brands