manualshive.com logo in svg

Avaya CS 1000, Fundamentals

The Avaya CS 1000 user manual provides comprehensive insights into the fundamental features and functionalities of this exceptional product. Download the free manual from our website and unlock a wealth of knowledge to maximize your Avaya CS 1000 experience.

Share
Download
background image

If a firewall is installed on your DAP Controller PC, ensure the firewall does not block the
ports used for various services. For information, see 

Firewall protection

 on page 76.

• Internet Explorer 6.0 or later

• MS .Net Framework —this component is automatically installed and configured during

DAP Controller installation

• Internet Information Services (IIS) - this component is automatically installed and

configured during DAP Controller installation (MS Windows setup disc maybe required in
some cases).

• DHCP and TFTP servers

For information about installing DHCP and TFTP servers, see 

DHCP and TFTP

servers

 on page 76.

• DAP Controller (IP DECT Configurator and DAP Manager)

For information about installing the DAP Controller, see 

DAP Controller

 on page 90.

Firewall protection

Both Windows XP Professional and Windows 2003 Server have built-in firewalls.

By default, the firewall under Windows XP Professional does not allow incoming access.
However, the IP DECT Configurator can automatically change the firewall settings. Verify the
firewall settings after installation.

If a third-party firewall program is installed on your DAP Controller PC, ensure the firewall does
not block the ports used for the SIP DECT system. By default, some ports are defined in IP
DECT Configurator.

The ports defined by default:

• From 3000 to 22229--multicast

• From 28000 to 28017--DAP Controller services

• 30160--CDA services

If you change default ports in the IP DECT Configurator, ensure that the firewall settings are
updated correctly.

DHCP and TFTP servers

Each DAP receives an IP addresses, configuration file and firmware from the IP network using
a DHCP server and a TFTP server. Choose whether to use the Microsoft Windows DHCP
server or the TFTP server or both, or the built-in DAP controller DHCP and TFTP servers.

DHCP servers and TFTP servers are the network components of the Microsoft Windows 2003
Server. Install these servers as services for the SIP DECT system functions. For more

Software requirements

76     SIP DECT Fundamentals

October 2012

Comments? [email protected]

Summary of Contents for CS 1000















































































































































































































































































Reviews:

No comments

Related manuals for CS 1000

IBM LS42 - BladeCenter - 7902 Service Manual preview
LS42 - BladeCenter - 7902
Brand: IBM Pages: 194
HYVE AQUILADSF Manual preview
AQUILADSF
Brand: HYVE Pages: 22
Premio FlacheSAN1L-D4 Quick Manual preview
FlacheSAN1L-D4
Brand: Premio Pages: 3
DNP WSP PRO Quick Start Manual preview
WSP PRO
Brand: DNP Pages: 2
Kenwood HAM RADIO DELUXE User Manual preview
HAM RADIO DELUXE
Brand: Kenwood Pages: 16
Planet FPS-1100DG User Manual preview
FPS-1100DG
Brand: Planet Pages: 72
Chip PC JackPC EFI-6700 Specifications preview
JackPC EFI-6700
Brand: Chip PC Pages: 4
Meinberg TCR167PCI Operating Instructions Manual preview
TCR167PCI
Brand: Meinberg Pages: 34
Meinberg LANTIME IMS-M500 Manual preview
LANTIME IMS-M500
Brand: Meinberg Pages: 63
Wiredocean SBS 1000 Owners Handbook And Installation Instructions preview
SBS 1000
Brand: Wiredocean Pages: 36
NASdeluxe NDL-2500T Quick Installation Manual preview
NDL-2500T
Brand: NASdeluxe Pages: 6
3onedata NP316 User Manual preview
NP316
Brand: 3onedata Pages: 12
Oracle Exadata Storage Server X7-2 EF Service Manual preview
Exadata Storage Server X7-2 EF
Brand: Oracle Pages: 284
Gigabyte H282-Z60 User Manual preview
H282-Z60
Brand: Gigabyte Pages: 138
LaCie 301257U - 1 TB 2big Network Attached Storage Hard... User Manual preview
301257U - 1 TB 2big Network Attached Storage Hard...
Brand: LaCie Pages: 65
Quanmax RAK-120S User Manual preview
RAK-120S
Brand: Quanmax Pages: 77
QNAP Turbo NAS TS-EC2480U-E3-4GE-R2 Hardware User Manual preview
Turbo NAS TS-EC2480U-E3-4GE-R2
Brand: QNAP Pages: 63
IBM xSeries 330 Hardware Maintenance Manual preview
xSeries 330
Brand: IBM Pages: 158

Brands by name

Popular brands

Load more brands