manualshive.com logo in svg

Avaya CS 1000, Fundamentals

The Avaya CS 1000 user manual provides comprehensive insights into the fundamental features and functionalities of this exceptional product. Download the free manual from our website and unlock a wealth of knowledge to maximize your Avaya CS 1000 experience.

Share
Download
background image

Chapter 5:  System configuration

Traditional Digital Enhanced Cordless Telecommunications (DECT) is an application on the system that
allows digital wireless capabilities. With DECT, users can move around their work sites while answering
a call, making a call, continuing a call, or transferring a call.

Session Initiation Protocol (SIP) DECT on SIP Line provides the features of traditional DECT so that the
SIP DECT system can interact with Avaya Communication Server 1000 (Avaya CS 1000) through the SIP
Line gateway.

Prior to Communication Server 1000 Release 7.0, it was possible to connect SIP clients using the SIPN
connection method. Beginning in CS 1000 Release 7.0 the SIPN connection method is no longer
supported; however, you can migrate your SIPN connection to a SIPL connection. For more information
on the Upgrade procedure, see 

Upgrade a SIPN connection to a SIPL connection

 on page 235

Navigation

This section contains the following navigation links to SIP DECT configuration procedures:

•

Basic (simple) SIP DECT configuration with Communication Server 1000 SIP Line
Gateway

 on page 93

•

Routed Head Quarter configuration

 on page 109

•

Multiple-site mobility network configuration

 on page 113

Basic (simple) SIP DECT configuration with Communication
Server 1000 SIP Line Gateway

To configure the SIP DECT system, you must configure the following three components: the
Call Server, the SIP LINE Gateway, and the DAP manager. Use the DAP manager to configure
and monitor DAPs.

Use the following tools to configure a SIP DECT system:

• Element Manager or overlay program for Call Server

• IP DECT Configurator and DAP manager IP DECT, which are available as a part of the

DAP controller software package

SIP DECT Fundamentals

October 2012     93

Summary of Contents for CS 1000















































































































































































































































































Reviews:

No comments

Related manuals for CS 1000

D-Link DSN-4100 Series Quick Start Manual preview
DSN-4100 Series
Brand: D-Link Pages: 2
Acano Solution Installation Manual preview
Solution
Brand: Acano Pages: 17
Xerox EX Specification Sheet preview
EX
Brand: Xerox Pages: 2
Xerox EX Brochure & Specs preview
EX
Brand: Xerox Pages: 2
IBM 5887 Manual preview
5887
Brand: IBM Pages: 92
360 Systems V2000 Series Operation Manual preview
V2000 Series
Brand: 360 Systems Pages: 117
Moxa Technologies ioLogik W5300 Series User Manual preview
ioLogik W5300 Series
Brand: Moxa Technologies Pages: 177
HPE 3PAR StoreServ Service And Upgrade Manual preview
3PAR StoreServ
Brand: HPE Pages: 174
KYLAND SICOM3005A Hardware Installation Manual preview
SICOM3005A
Brand: KYLAND Pages: 30
Sun Oracle SPARC T3-2 Service Manual preview
SPARC T3-2
Brand: Sun Oracle Pages: 222
Video Server 4 Ch Video Sever User Manual preview
4 Ch Video Sever
Brand: Video Server Pages: 34
H3C UniServer R2700 G3 User Manual preview
UniServer R2700 G3
Brand: H3C Pages: 226
Supero SUPERSERVER 5014C-MT User Manual preview
SUPERSERVER 5014C-MT
Brand: Supero Pages: 112
SpectraLink IP-DECT SERVER 400 Installation And Configuration Manual preview
IP-DECT SERVER 400
Brand: SpectraLink Pages: 221
Siemens Server Installation, Operation And Maintenance Manual preview
Server
Brand: Siemens Pages: 48
Siemens SINUMERIK 840Di sl/840D sl Function Manual preview
SINUMERIK 840Di sl/840D sl
Brand: Siemens Pages: 250
NAIM NS01 Reference Manual preview
NS01
Brand: NAIM Pages: 20
AIC SB101-LB User Manual preview
SB101-LB
Brand: AIC Pages: 86

Brands by name

Popular brands

Load more brands