Avaya CS 1000, Fundamentals

Page: 195 / 270

Alternatively, you can add a building by drawing it in place; click the left mouse
button to indicate the lower left corner of the building, and then click the right mouse
button to access the menu, and choose
Add Building .
The Add Building window appears.
5. Enter values for the location and the size.
• In the x and y fields, define the position of the lower left corner of the
building.
• In the h field, define the width (x size) of the building.
Avaya recommends that you enter the actual width of the building in meters.
• In the field, define the depth (y size) of the building.
Avaya recommends that you enter the actual depth of the building in meters.
After entering values for the building size and location, you can make changes by
selecting the building and editing the values that appear in the
Edit pane.
6. To add lines to a building, double-click on the building to which to add lines. The
Building view is activated.
Lines are used to add contours and shapes to buildings. The lines can provide a
reference to items on the maps like stairwells, elevator shafts or oddly shaped (non
rectangular) buildings.
7. In the Building view, add lines using either of the following methods:
• Add lines using the Add lines tool:
- Right click in the Location area. A menu appears.
- Choose Add lines from the menu.
OR
• Add lines in freehand mode:
- Click Line in the draw controls box.
- With your mouse pointer in the position where you want the line to begin,
click and hold down the left mouse button.
- Move your mouse pointer to the point where you want the line to end, and
release the mouse button.
- Repeat these steps to draw additional lines.
To make it easier to create straight lines in freehand mode, first click snap to
grid , which will make it easier to draw straight lines. Optionally, adjust the Grid
Size .
8. If your buildings have only one floor, skip this step.
To add a floor, double-click the border line of the building to which to add a floor.
Create a location file
SIP DECT Fundamentals October 2012 195