manualshive.com logo in svg

Avaya CS 1000, Fundamentals

The Avaya CS 1000 user manual provides comprehensive insights into the fundamental features and functionalities of this exceptional product. Download the free manual from our website and unlock a wealth of knowledge to maximize your Avaya CS 1000 experience.

Share
Download
background image

Figure 50: Example of a site coverage floor plan

Obtaining site plans

Obtain two site plans or maps with dimensions marked.

Use one working copy to identify critical points, cell centers, and cell boundaries. Use
one clean copy to attach to the site provisioning record for the installer, customer, or
maintenance.

Gather building information

Gather the following information and enter it into the work order.

Gathering building information

1. Obtain and record building identification.

2. Obtain and record information about construction materials, such as walls, floors,

and ceilings.

3. Record the type facilities, such as office, hotel, factory, store.

4. Record the number of floors in the building.

If the building contains atriums, multiple floors, or floors not all the same shape or
unusual conditions, see 

Deploying on multiple floors

 on page 58.

5. Record the height of floors.

6. Record as much information as you can obtain about the partitioning of floors.

Site planning example: Able-Studio

SIP DECT Fundamentals

October 2012     201

Summary of Contents for CS 1000















































































































































































































































































Reviews:

No comments

Related manuals for CS 1000

NEC Express 5800 Series User Manual preview
Express 5800 Series
Brand: NEC Pages: 90
ICP DAS USA PDS-220F Series User Manual preview
PDS-220F Series
Brand: ICP DAS USA Pages: 94
Vxl Itona C23S Specifications preview
Itona C23S
Brand: Vxl Pages: 2
Thecus N12000 series User Manual preview
N12000 series
Brand: Thecus Pages: 120
X-media XM-PS110P Quick Installation Manual preview
XM-PS110P
Brand: X-media Pages: 10
Polycom KIRK 14117800 Installation And Configuration Manual preview
KIRK 14117800
Brand: Polycom Pages: 220
Jatheon PnC 100 Installation & Administrators Manual preview
PnC 100
Brand: Jatheon Pages: 52
Telvue HyperCaster User Manual preview
HyperCaster
Brand: Telvue Pages: 153
HMS Networks Intesis IBMBSDAL0640000 User Manual preview
Intesis IBMBSDAL0640000
Brand: HMS Networks Pages: 39
IBM x3105 - System - 4347 Service Manual preview
x3105 - System - 4347
Brand: IBM Pages: 130
IBM System x3650 Type 7979 Problem Determination And Service Manual preview
System x3650 Type 7979
Brand: IBM Pages: 194
Chauvet VIP Media Server Pro Quick Reference Manual preview
VIP Media Server Pro
Brand: Chauvet Pages: 20
Advantech AGS-913 Series User Manual preview
AGS-913 Series
Brand: Advantech Pages: 100
Red Hat Linux Virtual Server Manual preview
Linux Virtual Server
Brand: Red Hat Pages: 82
R.V.R. Elettronica SpA TLC2000 User Manual preview
TLC2000
Brand: R.V.R. Elettronica SpA Pages: 128
Eelectron Horizone Mini IN00M02WEB Installation Manual preview
Horizone Mini IN00M02WEB
Brand: Eelectron Pages: 118
AirLive MFP-101U User Manual preview
MFP-101U
Brand: AirLive Pages: 113
I-O Corporation Pro Edge User Manual preview
Pro Edge
Brand: I-O Corporation Pages: 37

Brands by name

Popular brands

Load more brands