is displayed in the DECT Handset Configurator window. You can save the handset
configuration to a file or enter the required changes, as previously described .
Note:
If you are reading a card, any changes you make are not applied automatically to the
configuration stored on the MEM card. To save the changes on the card, select
Write
from
the Card menu in the DECT Handset Configurator tool.
Clearing a MEM card
Clearing a card deletes all configuration information, including subscriptions, messages and
call logs. To clear a MEM card, insert it in the card reader and select
Clear
from the Card menu
in the DECT Handset Configurator tool. All information stored on the card is deleted.
Writing a MEM card
Writing a card means copying the configuration shown in the DECT Handset Configurator
window and saving it to the MEM card. To write a card, you read a card, perform any desired
changes, and select
Write
in the Card menu. The configuration is copied to the MEM card.
Alternatively, you can open a saved image file in the DECT Handset Configurator and select
Write
in the Card menu to copy the information to the MEM card.
Writing batch for MEM cards
Writing batch is a special feature that enables you to prepare a number of MEM cards with
preconfigured settings and subscriptions. The feature enables you to subscribe DECT
Handsets within a defined subscription range automatically without entering PARK and PIN
codes.
To write a batch of MEM cards, perform the following steps:
1. Create or open an image file , as described previously.
2. Delete subscriptions (if any) in the current image by clicking
Settings >
Connectivity
in the menu.
3. Prepare a subscription file as described in
on page 247.
4. In the card reader, insert a MEM card for the first DN from the range defined in the
subscription file.
5. In the Card menu, select
Write batch
.
Important:
Writing batch replaces the first SR on the card even if there are empty fields.
6. Enter the DECT system name in the
Network
name field (the DECT system name
is displayed on the DECT Handset screen).
7. Click
Browse
and navigate to the prepared subscription file.
8. Click
OK
.
9. When the card is written, remove it from the card reader.
You are then informed about the DN of the next card to write.
DECT Handset Configurator Tool
246 SIP DECT Fundamentals
October 2012
Summary of Contents for CS 1000
Page 6: ...6 SIP DECT Fundamentals October 2012 ...
Page 146: ...System administration 146 SIP DECT Fundamentals October 2012 Comments infodev avaya com ...
Page 174: ...System maintenance 174 SIP DECT Fundamentals October 2012 Comments infodev avaya com ...
Page 204: ...Site survey example 204 SIP DECT Fundamentals October 2012 Comments infodev avaya com ...
