Avaya CS 1000 Fundamentals Download Page 253

Page: 253 / 270

- Emergency Call number

- Message for emergency call (applied only to 4070/4075)

- Answer Mode

- Silent Charging mode

• Connectivity

- Subscription data, such as:

• PARI (read only)

• SARI (read only)

• Network name (changeable)

• Number (changeable)

• Import subscription data from file (See

Importing a subscription to the image

page 248 for information on performing this procedure.)

Calls

The

Calls

menu allows you to view and delete the call logs for missed, answered, and dialed

calls.

Select the

Calls

menu on the left and use the context menu on the right to perform the required

operations.

Calendar and Accessories

Calendar and Accessories features are not enabled for configuration from the DECT Handset
Configurator tool.

Feature selection

This menu allows you to enable or disable a wide variety of settings to make available to the
handset user. When a function/feature is disabled for the user, the user cannot change the
setting. This provides protection against misuse.

Feature selection

SIP DECT Fundamentals

October 2012 253

Summary of Contents for CS 1000















































































































































































































































































Search results

Summary of Contents for CS 1000

Reviews:

Related manuals for CS 1000

Brands by name

Popular brands

Avaya CS 1000, Fundamentals

Search results

Summary of Contents for CS 1000

Reviews:

Related manuals for CS 1000

Brands by name

Popular brands