Avaya CS 1000 Fundamentals Download

Page: 84 / 270

Installing the TFTP server

1. If you have Windows 2003, go to Start > Control Panel in Windows.

2. Open Add/Remove Programs.

3. Click on the Add/Remove Windows Components.

The Windows Components Wizard window appears.

4. In the Components window, select the Remote Installation Services check box.

5. Click Next.

6. Insert the Windows 2003 CD-ROM as prompted.

7. Follow the instructions in the dialog box to complete the procedure.

8. Close the Add/Remove Programs window and close the

Control panel

window.

9. Click yes after you are prompted to restart the computer.

Starting the TFTP server

1. If you have Windows 2003, go to Start > Control Panel.

2. Open Administrative Tools.

3. Open Services.

Software requirements

84 SIP DECT Fundamentals

October 2012

Comments? [email protected]

Summary of Contents for CS 1000















































































































































































































































































Search results

Summary of Contents for CS 1000

Reviews:

Related manuals for CS 1000

Brands by name

Popular brands

Avaya CS 1000, Fundamentals

Search results

Summary of Contents for CS 1000

Reviews:

Related manuals for CS 1000

Brands by name

Popular brands