3. If you are exporting multi-site subscriptions, select
Multi-site subscriptions
.
4. Enter the
PARI
of the remote system.
5. If you are exporting multi-site subscriptions, enter the
SARI
of the remote system.
6. Click
OK
.
7. Click
Add Number Range
.
The
Add Number Range
page appears.
8. In the
From
field, enter the first number in the range of DNs to which you want to
export subscription data.
If you are exporting data for one DN only, proceed to step 16.
9. In the
To
field, enter the last number in the range.
10. Click
OK
.
11. Select the required available extension number from the list on the Subscription
page; for example,, select 5001.
If the number you require does not show, select another page. The page number
appears in the top and bottom rows of the subscriptions table.
12. Click
Enable
OR
Click
Enable for multi-site
, if you are exporting multi-site subscriptions.
The status of the configuring subscription record changes from Free to Enabled and
the Personal Identification Number (PIN) appears. The DAP manager generates a
PIN when it performs each subscribe operation; the PIN appears only when the
subscription status is Enabled.
Subscription export and import
SIP DECT Fundamentals
October 2012 135
Summary of Contents for CS 1000
Page 6: ...6 SIP DECT Fundamentals October 2012 ...
Page 146: ...System administration 146 SIP DECT Fundamentals October 2012 Comments infodev avaya com ...
Page 174: ...System maintenance 174 SIP DECT Fundamentals October 2012 Comments infodev avaya com ...
Page 204: ...Site survey example 204 SIP DECT Fundamentals October 2012 Comments infodev avaya com ...