AutoGate Shield M30 Series, Installation & Operation Manual

Page: 7 / 60

1.800.944.4283 AutoGate Technical Support
Mar 6, 2019
7
Genesis™ Control Board
Solid State coated programmable control board in an
electrical enclosure (Tested to –40° F).
Security Breach Protection: Built in 24V brake when A/C
or battery is present. Optional internal locking Solenoid
mechanism.
Built in sensor for real time barrier position.
Monitored Inputs: Open - 2 inputs , Close - 2 inputs and an
additional (2) programmable inputs for Open or Close.
Programmable Inputs, Outputs, & Relays: The Genesis
board has 2 programmable inputs, 2 programmable out-
puts, and 2 built in relays for configuration and integration.
Control Wiring: 16 & 18 Ga. Single conductor. Copper
with electronic compression terminals tin-plated for max
corrosion prevention. Non-AutoGate components, accesso-
ries, and access control is per individual manufacturer
Instruction. Contact AutoGate with questions.
Delayed Closing: Programmable from 0 - 90 seconds.
Preemptive outputs: 1 - 5 seconds before gate moves.
Motor & Drive System
RAD (Right Angle Drive): 1/2 HP, Gear Type, Right Angle
Locking Worm Drive, Muti Temp Synthetic Lube, Equipped
with disengage lever for Manual Operation.
Multi Belt/High torque dual reduction system, Counter Bal-
anced for smooth operation.
Operator
Construction: Frame - 2” Sq., 11 Ga. (.120). Mounting
pads—304 SS. Skins - 18 Ga. Galvanneal.
Gate Mounting Hardware: 304 Stainless Steel
Operator size: 68”Length, 52” Height, 39” Width
Paint: Standard Color - Black, powder coated. Spray
applied colors are Commercial Coating 2-part High Solids
Polyurethane. Standard Spray Colors: White, Brown,
Green, and Gray. Custom colors available.
VERTICAL PIVOT CRASH BARRIER SYSTEMS (VPCB)

MODEL VPCB-M30 (STD. FOUNDATION)

VPCB-M30-SF (SHALLOW FOUNDATION)

VPCB-M50 (STD. FOUNDATION)
PRODUCT SPECIFICATIONS
General Information
Ratings: ASTM F2656-07 Standard. M30/P1 & M50/P1 and
listed on the DoD Anti-Ram Vehicle Barrier List
Power Supply Options: 120VAC—Single Phase, 20 Amp
Service. 240VAC—Single Phase, 10 Amp Service.
Batteries & Charging System: Built-in Battery Backup. Two
12v Batteries Required (Field Supplied). Recommended
Batteries: Group 24, Sealed Marine Starting
Arm Limit/Position Sensor (LPS): Self aware of gate posi-
tion at all times. Open and Closed Limit Positions.
Open/Closing Speed: 12-14 seconds Std.
Shipping Weight: Typical (Includes Drop arm/gate system
and Bolsters) Gate & Operator wieght: 2000 lbs.
Bolsters:
VPCB-M30:
3,000 lbs.
VPCB-M30SF: 5,200 lbs.
VPCB-M50: 5,300 lbs.
Warranty: Industrial/Commercial (3 years) from date of
shipment on manufactured components workmanship.
Purchased components and accessories are covered under
their respective warranties. (See full warranty for details)
Optional Accessories: Loop Detectors, Gear Motor Heater,
Extreme Cold Package, MUTCD Reflective Tape, LED Warn-
ing lights, Audible Devices, and Emergency Access Systems
(SOS, Opticom, Click to Enter, Key Box/Switch, etc.)
Transport Maintenance Pin (T/M): used for transport,
maintenance to negate movement of Drop arm/gate panel)
Arm & Gate Construction
Systems are available in barrier arm only for forced
vehicular entry denial and with a full gate panel fabricated
to the barrier arm for anti-personnel capabilities.
Available clear open lengths: M30: 19’ with barrier arm
only and 17’ with gate panel fabricated to drop arm/gate.
M50: 17’ with barrier arm only and 15’ with gate panel
fabricated to drop arm/gate.
Barrier Arm Construction: 6063 3/16” channel and 5052
3/16” plate. Locking Pins: 4140 Steel. Gate Construction:
2 1/2” Sq. , 7 Ga. (.187) Aluminum Tubing.
Gate Max Length: 19’ Overall length (17’ clear open sec-
tion).
Gate Heights: 6’ - 9’ from pad grade. Consult factory for
gates over 8’ high as they require special crating and
freight arrangements.
Picket Construction: Aluminum—3/4” Sq. 1/8” wall is
standard. Note: Contact factory for special sizes, spacing,
and custom materials.
Chain Link Fabric: Steel 9 Ga. Alum Fabric is standard on
larger gates (Vinyl coated fabric available).
Drop Arm & Gate Paint: Spray applied colors are
Commercial Coating 2-part High Solids Polyurethane.
Standard Spray Colors: Black, White, Brown, Green, and
Gray. Custom colors available.