AutoGate Shield M30 Series, Installation & Operation Manual

Page: 60 / 60

1.800.944.4283 AutoGate Technical Support
Mar 6, 2019
60
6. Loops and Loop Detectors Checked  Initials:_____________
 Loops installed per manufacturers instructions and project plans and specifications.
 Test loop resistance with Ohm meter. Note measured resistance level:___________
 Test vehicle detection with vehicle(s).
 Note Loop Detector(s) used. Manufacturer:_______________ Model:________________
7. Mechanical and End User Training/Demonstration. Performed  Initials:_____________
 Photo Eyes (if used) cause Drop arm/gate to stop and reverse.
 Contact Sensors (if used) cause Drop arm/gate to stop and reverse.
 Test the Inherent Entrapment system.
 Instruct End User on all external lights, control board lights, and Genesis LCD screen indicators.
Demonstrate how to reset the system.
8. Miscellaneous Performed  Initials:_____________
 Kick Panel installed on Door side of operator
 Debris Shield (if ordered) installed in the back of operator
 Any field wiring is secured, protected from the weather, and protected from pinching or mechanical
strikes.
9. Photographs and Checklist Submittal. Performed  Initials:_____________
 Photos taken of the system with Drop arm/gate open and Drop arm/gate closed.
 Photos taken from Secure side and Public side.
SHIELD POST INSTALLATION CHECKLIST (con’t.)