AudioCodes MediaPack MP-40 series, User Manual

Page: 138 / 180

MediaPack BRI Series
User's Manual 138 Document #: LTRT-83702
Table 6-24: DHCP Server, DNS, and SNTP Clients Parameters
Parameter Description
DHCP Server Parameters
State
[context ip
Interface LAN
[no] use profile dhcp-server
<name>]
Define if the DHCP server is enabled or disabled.
Start IP
[include<start ip> <end ip>]
Define the start of the IP address pool that the DHCP server can use to assign
IP addresses to clients requesting an IP address.
End IP
[include<start ip> <end ip>]
Defines the end of the IP address pool used by the DHCP server to assign
clients requesting an IP address.
Default router
[default-router <IP>]
The DHCP server can provide a default gateway. The client requesting an IP
address can use this IP address as a default gateway.
Lease time
time (s)
[lease <10..65535>]
The DHCP server must include a lease time for which the client that requested
the IP address is allowed to use this address. After expiry of the lease time, the
client must renew the address or stop using it.
Domain name
[domain-name <fqdn>]
The DHCP server can assign a domain name to the client requesting an IP
address. The client may then use this name as its domain name.
Domain name server
[domain-name-server <IP>]
The DHCP server can assign a DNS server to the client requesting an IP
address. The client can then use this IP address as DNS servers.
Boot file
[bootfile <name>]
The DHCP server can offer a boot file. Clients supporting this option may use
the boot file. This option should be used in conjunction with the Next Server
option.
Next server
[next-server]
Specify the next server. The client may use this information to acquire
additional information.
DNS Parameters
Resolver State
[[no] dns resolver]
The DNS resolver is used for DNS resolution. If you used DNS names in the
configuration (e.g., proxy), the DNS resolver must be enabled and a valid
Primary server IP address must be specified. For redundancy reasons, you
may specify a secondary DNS server IP address.
Relay State
[[no] dns relay]
The gateway supports a DNS relay. In other words, clients on the LAN can use
the gateway as a DNS server. The gateway uses the configured DSN resolver
to reply to the DNS requests from clients on the LAN. To enable this feature,
the DNS relay option must be enabled.
Primary Server IP
[dns nameserver <ip>]
Defines the IP address of the primary DNS server.
Secondary Server IP
[dns nameserver <ip>]
Defines the IP address of the secondary DSN server.
Cache size
[dns cache <size>]
Defines the size of the DNS cache.
The valid range is 0 to 20.
SNTP Client Parameters
SNTP Client State
[[no] key_sntp-client]
The Simple Network Time Protocol (SNTP) client is used to acquire time
information from the network. The SNTP client can be enabled or disabled.
Operation mode
[sntp-client operating-mode
<anycast | multicast | unicast>]
Defines the mode used to acquire time.
Valid options include:
ƒ
any-cast
ƒ
multicast
ƒ
uni-cast