AudioCodes MediaPack MP-40 series, User Manual

Page: 61 / 180

User's Manual 4. Initial Configuration
Version 2.2 61 July 2007
4.1.10 Saving the Configuration Settings
To ensure that the currently modified configuration is permanently applied, you must save it
to the MediaPack's non-volatile memory.
¾
To save the configuration changes to the non-volatile memory:
1. On the main menu bar, click the Load & Save Configuration button; the ‘Load &
Save Configuration’ screen is displayed.
Figure 4-16: Load & Save Configuration Screen
2. Click the Save Configuration button; a confirmation message appears when the save
is complete.
4.1.11 Configuring the ISDN Telephone Units
At this stage, the MediaPack is configured for establishing calls between Unit A and Unit B,
from Unit A to the external PSTN network, and from Unit B to the external PSTN network.
Therefore, before generating a call, verify the following configurations:
„
The ISDN phone that is connected to Unit A is configured with the MSN - 1000
„
The ISDN phone that is connected to Unit B is configured with the MSN - 2000