AudioCodes MediaPack MP-40 series, User Manual

Page: 90 / 180

MediaPack BRI Series
User's Manual 90 Document #: LTRT-83702
¾
To configure ISDN general settings:
1. Open the ‘ISDN General Settings' screen ( Protocol Management menu > ISDN
submenu > ISDN General Settings option).
Figure 6-6: ISDN General Settings Screen
2. Configure the ISDN general parameters according Table 6-4 .
3. Click the Submit button to apply your changes.
4. To save the changes to the flash memory, refer to Section ' Saving Configuration
Settings on the MediaPack ' on page 146 .
Table 6-4: ISDN General Parameters
Parameter Description
Clock Source
[clock-mode master]
Defines which port to use as clock source.
Valid options include:
ƒ
None = the system will use an internal clock
ƒ
0…3 = ISDN port 0 to 3, depending on model
Note: The selected clock must be configured as Uni-Side USER; otherwise the
system uses an internal clock.
Tone Set
[tone-set <name>]
Defines which tone set is used to generate call progress tones such as busy tone.
Valid options include the following:
ƒ
Default = built-in Tone Profile
ƒ
A = Austria
ƒ
D = Germany
ƒ
F = France
ƒ
I = Italy
ƒ
N = Norway
ƒ
P = Poland
ƒ
S = Sweden
ƒ
UK = England