AudioCodes MediaPack MP-40 series, User Manual

Page: 57 / 180

User's Manual 4. Initial Configuration
Version 2.2 57 July 2007
d. From the 'Authentication Mode' drop-down list, select one of the following:
♦
’Per User’ (default): requires the configuration of the SIP users as described
in Step 4.
♦
‘Per Gateway’: requires that you provide ‘Default user name’, ‘Default user
password’ and ‘Default user cnonce’
(In our example setup for Unit A , the Authentication mode is set to ’Per User’.)
e. Click the Submit button.
5. If in the 'SIP Proxy & Registration' screen the Authentication mode was set to ‘per
user’, perform the following:
a. Access the 'SIP Users' screen ( Protocol Management menu > SIP Gateway
submenu > SIP Users option).
Figure 4-12: SIP Users Screen
b. Add the SIP users ‘Name’ (phone number) and ‘Password'. (In our example
setup for
Unit A , SIP user ID 1 was defined with the name "1000" and without a
password; SIP user ID 2 was defined with the name "3000" and without a
password).
6. Click the Submit button.
7. In our example setup, verify that Users 1000@10.33.2.35 and 3000@10.33.2.35 are
registered at the Proxy Server 10.33.2.20.
For additional SIP-related parameters, refer to Section ' SIP Gateway ' on page 80 .
For detailed information on the parameters ‘Registration Time’ and ‘Authentication Mode’,
refer to refer to
Table 6-2 on page 83 .