AudioCodes MediaPack MP-40 series, User Manual

Page: 29 / 180

User's Manual 3. Installing the MediaPack
Version 2.2 29 July 2007
¾
To install the MediaPack in a 19-inch rack:
1. Remove the two screws on one side of the device nearest the front panel.
2. Insert the peg on the short bracket into the third air vent down on the column of air
vents nearest the front panel.
3. Swivel the bracket until the holes in the bracket line up with the two empty screw holes
on the device.
4. Use the screws found in the devices’ package to attach the short bracket to the side of
the device.
5. Remove the two screws on the other side of the device nearest the front panel.
6. Position the long bracket so that the holes in the bracket line up with the two empty
screw holes on the device.
7. Use the screws found in the device’s package to attach the long bracket to the side of
the device.
8. Position the device in the rack and line up the bracket holes with the rack frame holes.
9. Use four standard rack screws to attach the device to the rack. These screws are not
provided with the device.
Figure 3-2: MediaPack with Brackets for Rack Installation