AudioCodes MediaPack MP-40 series, User Manual

Page: 52 / 180

MediaPack BRI Series
User's Manual 52 Document #: LTRT-83702
Figure 4-8: ISDN Ports Screen
3. From the 'ISDN Ports' drop-down list, select the ISDN port that you want to configure.
4. From the 'Uni-side' drop-down list, select the type of ISDN port:
•
User: User side is used when the MediaPack’s port is connected to a network
side entity such as an ISDN line or a PBX network interface.
•
Net: Network side is used when the MediaPack provides the network side
interface and the port is connected to a terminal equipment such as an ISDN
phone or PBX.
(In our example setup for Unit A , ISDN Port 1 is configured as User and ISDN Port 0
is configured as Net.)
5. From the 'ISDN Interface' drop-down list, select the ISDN interface number to which
the port belongs. Each ISDN port must bind/map to an ISDN interface. The mapping is
important because the IP to Tel Routing table routes the IP call to a designated ISDN
interface. The call is then established on the ISDN port that corresponds to the
specific ISDN Interface configured in this step.
(In our example setup for Unit A , ISDN Port 0 is bind to Interface 0 and ISDN Port 1 is
bind to Interface 1.)
6. Click the Submit button, and then perform steps 3 through 5 for each ISDN port.
For additional information on configuring ISDN ports, refer to Section ' ISDN Port ' on page
94 .