AudioCodes MediaPack MP-40 series, User Manual

Page: 102 / 180

MediaPack BRI Series
User's Manual 102 Document #: LTRT-83702
Table 6-8: Tel to IP Destination Number Manipulation Table
Parameter Description
Position Determines the priority of the configured manipulation rule, where "0" has the
highest priority.
Destination Number
[dest-num-match <num>]
Match the destination number [prefix, suffix, number]
Source Number
[src-num-match <num>]
Match the source number [prefix, suffix, number]
Number of Stripped Digits
[strip [prefix | suffix] <num>]
Strip the number of digits at the beginning of the number. If the number is included
in parenthesis "()", this function strips the suffix. A combination of prefix and suffix
e.g. 3(2) is valid.
Prefix (Suffix) to Add
[add [prefix | suffix] <num>]
Adds this prefix or (suffix). A combination of prefix and suffix e.g. 3(2) is valid.
Number of Digits to Leave
[leave <num>]
Number of remaining digits from the right.
Using CLI
To change the Tel -> IP Destination Number Manipulations parameters:
1. Log on to the system.
2. From the main configuration mode, change to the “Manipulation tel2ip dest-table” mode.
3. Enter a routing entry using the command:
pos <num> <values>
4. To remove a routing entry, use the command:
no pos <num>
For a detailed explanation of the supplied matching and manipulation criteria, use the online help
6.2.2.8 IP-to-Tel Source Numbers
The IP to Tel Source Number Manipulation table is used to define rules for changing the
destination number received in telephone-to-IP calls. The table is processed from top to
bottom, where the first matching rule is used to manipulate the number. Processing stops
after the first successful manipulation.
Note: For a description on the convention for entering telephone numbers in the
Manipulation tables, refer to Section '
Convention for Entering Phone
Numbers in Tables ' on page 66 .
¾
To configure IP-to-Tel source numbers:
1. Open the IP to Tel Source Number Manipulation Table ( Protocol Management menu
> Manipulation Tables submenu > IP
Æ
Tel Source Numbers option).