AudioCodes MediaPack MP-40 series, User Manual

Page: 111 / 180

User's Manual 6. Configuring the MediaPack
Version 2.2 111 July 2007
2. From the 'IP Profiles' drop-down list, select the entry that you want to edit.
3. Configure the IP profile according to Table 6-14 .
4. Click the Add button to apply the settings.
5. To save the changes to the flash memory, refer to Section ' Saving Configuration
Settings on the MediaPack ' on page 146 .
You can modify an entry by clicking the Modify button and delete an entry by clicking the
Remove button.
Table 6-14: IP Profile Parameters
Parameter Description
ID Profile ID.
Valid range is 1 to 30.
Profile Name The profile name is listed as comment. It is not relevant for configuration. The
name is a string of no more than 20 characters.
Fax signaling method
[[no]fax <g711|t38>]
Defines how fax is handled.
Valid options include:
ƒ
No Fax = fax detection is disabled.
ƒ
T.38Relay = fax is transmitted using T.38. If T.38 Negotiations fail, the system
performs a fallback to the last active coded.
ƒ
G.711Transport = fax is transmitted using g.711 a-law.
Allow modem bypass
[[no]modem-bypass]
Defines how modem calls are handled.
Valid options include:
ƒ
Enable = modem calls are transmitted using G.711 a-law
ƒ
Disable = modem calls are transmitted with the currently active codec
Jitter mode
[[no]adaptive-jitter]
Determines the type of jitter buffer.
Valid options include:
ƒ
Adaptive
ƒ
Static
Jitter max delay
[jitter-max-delay <value>]
Defines the maximum jitter delay. The Adaptive jitter buffer does not exceed this
value.
Valid range is 10 to 300 msec. The default value is 70.
DSP output gain
[dsp-output-gain]
Defines the DSP output gain.
The range is -31 to +31 dB.
DSP Fax/Modem gain
[dsp-fax-gain ]
Defines the DSP Fax/Modem gain.
The range is -31 to +31 dB.
DSP DTMF gain
[dtmf-gain <-31..31>]
Defines the DTMF gain.
The range is -31 to +31 dB.
Echo canceling
[[no]echo-canceling]
Enables or disables echo cancellation.
Valid options include:
ƒ
Enable
ƒ
Disable
Silence suppression /
comfort noise
[[no]silence-suppression]
Enables or disables silence suppression and comfort noise generation.
Valid options include:
ƒ
Enable
ƒ
Disable