AudioCodes MediaPack MP-40 series, User Manual

Page: 160 / 180

MediaPack BRI Series
User's Manual 160 Document #: LTRT-83702
A.1.3 Using Point-to-Multipoint Connections, PBX Subscriber Interface
A Point-to-Multipoint connection between the PBX and the MediaPack is illustrated in the
network architecture diagram below (
Figure A-3 ). The MediaPack is connected to the
PBX’s Subscriber interface. In other words, the PBX provides an ISDN Network and the
MediaPack is a User/Terminal device.
Figure A-3: Connecting to a PBX using Point-to- Multipoint Connection, PBX Subscriber
Interface
¾
To configure the MediaPack connection to the PBX:
1. Perform the initial configuration of the MediaPack’s IP interfaces and network settings
(refer to Section '
Connecting MediaPack's LAN Interface to your PC ' on page 40 ).
2. Access the ‘ISDN Ports’ screen ( Protocol Management menu > ISDN submenu >
ISDN Port Settings option).