AudioCodes MediaPack MP-40 series, User Manual

Page: 107 / 180

User's Manual 6. Configuring the MediaPack
Version 2.2 107 July 2007
¾
To configure the Tel to IP Routing table:
1. Open the ‘Tel to IP Routing Table’ screen ( Protocol Management menu > Routing
Tables submenu > Tel to IP Routing option).
Figure 6-14: Tel to IP Routing Table Screen
2. From the ‘Position' drop-down list, select the entry that you want to edit.
3. Configure the Tel to IP Routing table according to Table 6-12 .
4. Click the Insert button to insert an entry at the specified position.
5. To save the changes to the flash memory, refer to Section ' Saving Configuration
Settings on the MediaPack ' on page 146 .
You can modify an entry by clicking the Modify button and delete an entry by clicking the
Remove button.
Table 6-12: Tel to IP Routing Table Parameters
Parameter Description
Position Determines the priority of the configured routing rule, where "0" has the highest
priority.
Destination Number
[dest-num-match <num>]
Match the destination number [prefix, suffix, number].
Source Number
[src-num-match <num>]
Match the source number [prefix, suffix, number].
Destination IP Address
[dest-ip <IP>]
Defines the destination IP.
Profile ID
[profile-id <id>]
Determines the profile to be used.
Using CLI
To change the Tel -> IP destination number manipulations parameters:
1. Log on to the system.
2. From the main configuration mode, change to the “routing tel2ip table” mode.
3. Enter a routing entry using the command:
pos <num> <values>
4. To remove a routing entry, use the command:
no pos <num>
For a detailed explanation of the supplied matching and manipulation criteria, use the online help.
Note 1: The key “dest-if sip” is required if Call Routing is configured using the CLI. If call routing is configured
using the Web interface, this key is implicitly added.
Note 2: <num> denotes the dialing plan notation (refer to Section ' Dialing Notations ' on page 67 ).