AudioCodes MediaPack MP-40 series, User Manual

Page: 117 / 180

User's Manual 6. Configuring the MediaPack
Version 2.2 117 July 2007
Table 6-16: Coder Group Parameters
Parameter Description
ID Defines the coder group ID.
Valid range is 1 to 5.
Coder Defines the coder.
For a list of valid options see the list above.
Packetization Defines the packetization time.
For a list of valid options see the list above.
Using CLI
To define the Coder Group parameters:
1. Log on to the system.
2. From the main configuration mode, change to the “profile coder-group” mode.
3. To enter the “profile voice isdn” mode, use the command:
profile coder-group <1..5>
The last number indicates the coder group.
4. Define the coders in this coder group. To define a coder, use the command:
coder <num> <coder> [<bit rate>] <packetization time>
Where the valid range for <num> is: 1 to 5. T
he <bit rate> must be specified or G.726 and
G.727 .
For a list of valid combinations of coder and packetization time see the list at the beginning of this section.