MediaPack BRI Series
User's Manual
66
Document #: LTRT-83702
The Web interface consists of the following areas:
Main menu bar:
appears on the left of every screen, providing quick-and-easy access
to parameters, submenus, submenu options, functions, and operations.
Submenu bar:
appears on the top of screens and contains submenu options.
Title bar:
displays the name of the BRI gateway model
Workspace:
the main area of the screen in which information is viewed and
configured.
When positioning your curser over a parameter name (or a table) for more than a second,
a tooltip is displayed, providing a short description of the parameter.
5.2.3
Main Menu Bar
The main menu bar of the Web interface consists of the following menus:
Quick Setup
: use this menu to configure the gateway’s basic settings (refer to Section
'
Quick Setup
' on page
79
).
Protocol Management:
use this menu to configure the gateway’s control protocol
parameters and tables (refer to Section '
Protocol Management
' on page
79
)
Advanced Configuration:
use this menu to perform advanced configuration settings
(refer to Section '
Advanced Configuration
' on page
118
).
Status & Diagnostics:
use this menu to view hardware and software version
information (refer to Section '
Status & Diagnostics
' on page
139
).
Software Upgrade:
use this menu to load new software or configuration files to the
gateway (refer to Section '
Software Upgrade
' on page
144
).
Load & Save Configuration:
use this menu to load and save configuration changes
(refer to Section '
Load & Save Configuration
' on page
146
).
Reset:
use this menu to reset the gateway (refer to Section '
Restoring Factory Default
Configuration'
on page
152
)
5.2.4
Convention for Entering Phone Numbers in Tables
Phone numbers entered into various tables on the gateway, such as the Tel to IP routing
table, must be entered without any formatting characters. For example, if you wish to enter
the phone number 555-1212, it must be entered as 5551212 without the hyphen (-). If the
hyphen is entered, the entry does not work. The hyphen character is used in number entry
only, as part of a range definition.
Summary of Contents for MediaPack MP-40 series
