AudioCodes MediaPack MP-40 series, User Manual

Page: 158 / 180

MediaPack BRI Series
User's Manual 158 Document #: LTRT-83702
A.1.2 Using Point-to-Point Connections, PBX Trunk Interface
A Point-to-Point connection between the PBX and the MediaPack is illustrated in the
network architecture diagram below (
Figure A-2 ). The MediaPack is connected to the
PBX’s Trunk interface. In other words, the MediaPack provides an ISDN Network and the
PBX is a User/Terminal device.
Figure A-2: Connecting to a PBX using Point-to-Point Connection, PBX Trunk Interface
¾
To configure the MediaPack connection to the PBX:
1. Perform the initial configuration of the MediaPack’s IP interfaces and network settings
(refer to Section '
Connecting MediaPack's LAN Interface to your PC ' on page 40 ).
2. Access the ‘ISDN Ports’ screen ( Protocol Management menu > ISDN submenu >
ISDN Port Settings option).